GCX2 Features
2
P/N: 1005278-01
Introduction
GCX2 Features
The GCX2 receiver’s advanced design eliminates the need for cables during operation, allowing for a simplified
setup and less parts to keep track of. The GCX2 receiver features the following:
•
Compact, lightweight, and rugged design
•
A premier multi-constellation GNSS board featuring industry leading technology
•
Integrated multi-channel Long-Range Bluetooth technology
•
Internal memory for data storage
•
One internal battery, providing all day operation under normal operating conditions
•
A highly visible display panel with single-button operation
•
One USB port for communications and power
You can configure the GCX2 receiver in a variety of ways, depending on your project requirements. Typically,
the receiver supports the following operation modes.
•
Static/post-processing data collection
•
Job site RTK using Long-Range Bluetooth technology
•
Network Rover for DGPS and RTK operation
•
MAGNET Relay operation
•
SBAS-enabled operation
Unpacking Your Receiver Kit
This section describes the documentation, standard kit components, and accessories (depending on your
purchase) that accompany your receiver. When you unpack your receiver kit, verify you received the items listed
in this section. Make sure the items do not appear damaged from shipment. If any of the items are missing or
damaged, contact your Sokkia dealer or Sokkia technical support. See “Getting Technical Support” on page 3.
•
Receiver components are shown in Figure 2.
•
Receiver documentation is listed in “Technical Documents” on page 3.
System Components
The items shown in Figure 2 are shipped with your receiver.
Figure 2: System Components
Utility software for the GCX2 receiver may be downloaded from the
Sokkia
support
website:
.
