Sokkia CX-52 Скачать руководство пользователя страница 152 | Manualshive

Страница: 152 / 284

Sokkia CX-52 Скачать руководство пользователя страница 152

23. TRAVERSE ADJUSTMENT

144



• It is also possible to perform traverse adjustment by pressing [TRAV] when

allocated to the OBS mode screen.



Allocating [TRAV]: "31.3 Allocating Key Functions"

• Traverse adjustment results of traverse points, points observed from traverse

points and traverse adjustment data will be saved in the currently selected JOB
as Notes data. Data including the distributed closure error will also be saved in
the currently selected JOB as ordinary coordinate data.

Traverse line record (3):

1. point names of start and end points
2. backsight station name

and azimuth to

said backsight station
3. foresight station name

and azimuth to said

foresight

Adjustment setting record (1):

The selected method for distributing closure
error.

Closure error record (2x2):

1. precision and closure error for angle/
distance
2. coordinate closure error

Coordinate adjustment record
(No. of included points between start and end points):

Coordinates





Types of traverse

CX can calculate closed-loop and closed traverses. In both cases, the

azimuth for the start point (and for the end point in the case of a closed
traverse) must be set.

closed-loop traverse

«
...
150
151
152
153
154
...
»

Содержание CX-52





























































































































































































































































































Отзывы:

Нет отзывов