manualshive.com logo in svg

Sokkia CX-52, Руководство оператора, Страница: 116 / 284

Поделиться
Скачать
Sokkia CX-52 Скачать руководство пользователя страница 116

18. TOPOGRAPHY OBSERVATION

108

5.

Enter backsight point coordinates.
Enter the coordinates for the 
backsight point and press [OK].
If "No" is set for (5) Backsight 
distance measurement (BS Obs-
Dist) or (6) Backsight distance 
check (BS DistCheck) in the 
observation setting, this screen is 
not displayed.

6.

Register collimation point.
Set the name for the collimation 
point in advance. Press [ADD], 
enter the point name and press 
[OK] to register.
After registering the point to be 
measured, press [OK] to move to 
measurement.

"18.2 Observation"

If "No" is set for (4) Pre-entered 
point registration (PreenterPt) in 
the observation setting, this screen 
is not displayed.

• Pressing [DEL] deletes the 

selected point.

• Pressing [EDIT] enables to 

change the name of the selected 
point.

• Pressing [TOPO II] in the OBS mode also enables the same procedure.

 [TOPO II] allocation: "31.3 Allocating Key Functions"

• Number of characters, range and choices of the setting are as follows (*is the 

default setting):

•Number of distance sets: 1 * /2
•Number of distance readings: 1 * (Fixed)
•RL observation: Yes / No *
•Pre-entered point registration: Yes / No *

Topography

BS coord

NBS:

EBS:

PT  AUTO1000

0.000

0.000

OK

LOAD

PreenterPt

01: T-1

02: T-3

03:

04:

ADD

DEL

EDIT

OK

PreenterPt

PT

T-4

Содержание CX-52





























































































































































































































































































Отзывы:

Нет отзывов