Overview and Introduction
4
Main Features
Main features of iSTAR Edge include:
Storage
> 250k cards.
64 MB of RAM.
128 MB of onboard flash.
Power
Powered by
Ethernet connection: UL 294 Listed PoE or PoE Plus using optional add-on board
(edgePower). A UL Listed surge protector must be used with the PoE module. The PoE
board can supply either 12VDC or 24VDC to the relay outputs (selectable via a jumper
on the PoE board).
- or -
12/24V DC, from UL Listed apS power source or other UL 603 Listed, power-limited
power supply with appropriate ratings and a minimum 4 hours of standby power.
Provides up to 1.5A @ 12V unswitched to external devices:
Wiegand readers
RS-485 ports
Two 2-pin AUX power connectors for PIRs and motion sensors.
Provides power to relays:
Relays configurable to be wet or dry by jumper.
Wet Relays provide current at main input voltage (12 or 24V on PoE, 12 or 24V with
external DC supply).
Each wet relay is limited to 0.75A (at 12 or 24V).
Each dry relay is limited to 3.0A (at 12 or 24V).
Readers
2 or 4 readers total.
2 Wiegand connectors are available.
2 RMs are available to be configured for the 4 reader model to provide 4 Wiegand
connectors.
3 RS-485 serial ports are available.
Readers can be any combination of 2 from Wiegand ports and/or RMs on any of 3
serial ports.
I/O
8 general purpose inputs.
4 general purpose relays:
Dry or wet contact settable per relay by jumpers.
4-pin connectors to support NO/NC and dry/wet configurations.
2 reader model, 4- I8 and 4- R8 allowed to be configured on any of the three RS-485 ports.
Содержание iSTAR Edge
Страница 26: ......
