pg. 3
•
A wire connector is provided under the motor unit to permit connection of a minimum No. 6 AWG (4.1
•
mm) solid copper conductor between this point and any metal equipment, metal enclosures or
electrical equipment, metal water pipe or conduit within 1.5 m (5 ft) of the unit.
•
A green coloured terminal or a terminal marked G, Gr, Ground, Grounding or the symbol
is
located inside the supply terminal box or compartment. To reduce the risk of electric shock, this
terminal must be connected to the grounding means provided in the electric supply panel with a
continuous copper wire equivalent in size to the circuit conductors supplying this equipment.
•
All field-installed metal components such as rails, ladders, drains, or other similar hardware within 3 m
(10ft) of the Softub shall be bonded to the equipment grounding bus with copper conductors not smaller
than No. 6 AWG.
The Softub may be installed within 1.5m (5 ft) of metal surfaces if each metal surface is
permanently connected by a minimum No. 6 AWG (4.1 mm) solid copper conductor to the wire
connector under the motor unit which is provided for this purpose.
