pg. 18
Emptying & Refilling
NOTE:
Many hot tub and hot tub manufacturers recommend the use of a Hot Tub Plumbing Cleaner such as
Whirlpool Rinse
(Part # 1705) prior to draining.
If
Whirlpool Rinse
is used, follow this procedure:
1. Remove filter cartridge.
2. Pour 250 ml of
Whirlpool Rinse
into hot tub or hot tub prior to draining.
3. Turn pump on and run for one (1) hour with air control in CLOSED position.
5. Drain Hot tub.
6. Repeat each time the hot tub is to be emptied and cleaned.
If
Whirlpool Rinse
is not used to clean the plumbing system between fillings:
1. Drain the water.
2. Clean the hot tub surfaces.
3. Refill the hot tub with fresh water.
4. Add the recommended
Softub
products.