Softing Data Flow commModule MBP, Руководство по оборудованию

Страница: 8 / 36

commModule MBP - Hardware Manual
8
© Softing Industrial Automation GmbH
RXD7_P92 16 DI RX Interface signal for Debug Console (PD 33k)
TXD7_P90 17 DO TX Interface signal for Debug Console
DA1 18 AO For future use
GND 19 Ground Ground
3V_OUT 20 PO Power Output 3.15V
6V2_OUT 21 PO Power Output 6.2V
SIM_EN_P31 22 DBG Simulate Enable
GPIO_P23 23 GPIO For future use
GPIO_P22 24 GPIO For future use
GPIO_P21 25 GPIO For future use
GPIO_P20 26 GPIO For future use
GPIO_PC6 27 GPIO For future use
GPIO_PC7 28 DBG/GPIO For future use
GPIO_PC5 29 GPIO For future use
GPIO_PC4 30 GPIO For future use
EMLE 31 DBG Programming Interface
TDI 32 DBG Programming interface
GPIO_PD2 33 GPIO For future use
#RESET 34 DBG Programming interface
FINED 35 DBG Programming interface (do not pullup)
GND 36 Ground Ground
FB_P_NF 37 FB Do not use
FIELDBUS_N 38 FB Fieldbus
FIELDBUS_P 39 FB Fieldbus
FDE_PO 40 FB FDE, connect to Pin 41
FDE_PI 41 FB FDE, connect to Pin 40
FDE_NO 42 FB FDE, connect to Pin 43
FDE_NI 43 FB FDE, connect to Pin 42
* AI = Analog Input, AO = Analog Output, DI = CMOS Digital Input, DO = CMOS Digital Output, GPIO = General
Purpose CMOS Digital Input/Output, PO = Power Output, DBG = Programmer Interface, FB = Fieldbus, PD
Pulldown, PU Pullup