3
SK/ZK Series User's Manual
Page 15
3 Getting Started
3.1 Package Contents
The Starter Kit includes the following items:
A full-featured evaluation board;
An AC adapter;
A USB cable;
The SofTec Microsystems
“System Software”
CD-ROM;
The CodeWarrior Development Studio Special Edition CD-ROM;
A QuickStart Tutorial poster;
A registration card;
This user’s manual.
3.2 Operating Mode
The Starter Kit can work in two ways: Standalone mode and Host mode.
3.2.1 Standalone Mode
In Standalone mode, no PC connection is required. The microcontroller is
factory programmed with a sample application which reads the
potentiometer value and displays the results on the output area.
To work in standalone mode, the
“BKGD ENA”
and
“RESET ENA”
jumpers
in
“USB TO BDM INTERFACE”
section must be removed and you must
verify that no BDM-based in-circuit debugger/programmer is connected to
the BDM connector.
To run the built-in example:
