Sofarsolar HYD 3K-6K-EP, Руководство пользователя

Страница: 20 / 71

HYD 3K~6K-EP
User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
。
- 15 -
①
②
Step 2 Lift the inverter from the packing case and move it to the installation
position.
To prevent device damage and personal injury, keep balance when
moving the inverter because the inverter is heavy.
Do not put the inverter with its wiring terminals contacting the
floor because the power ports and signal ports are not designed to
support the weight of the inverter. Place the inverter horizontally.
When placing the inverter on the floor, put foam or paper under the
inverter to protect its shell.
Attention
3.7. Installing HYD 3K~6K-EP
Step 1 Determine the positions for drilling holes, ensure the hole positions are
level, then mark the hole positions using a marker pen, use the hammer drill to drill
holes on the wall(Aperture
Φ
10 mm). When drilling, keep the impact drill
perpendicular to the wall and drill slightly deeper than the length of the expansion
pipe. After drilling, please check whether the hole position is suitable with the back
plate. If the error is too large, please reposition the hole.
Step 2 Slowly hammer the expansion screw into the drilled hole.
Step 3 Position the back plate well, place the shrapnel and flat pad, and fix the
back plate with hexagon nut.
Step 4 Hang the inverter on the back plate and lock the inverter and the back
plate with M6 hex screw.
Step 5 You can secure the inverter to the rear panel and protect if from
stealing by installing an anti-theft lock (this action is optional).
Fig. 3-5 Installing HYD 3K~6K-EP