Soehnle 7811 Series, Руководство по эксплуатации

Страница: 8 / 32

8
Input procedure
Numeric fields: The digits 0 to 9 can be entered directly using the KEYPAD. The entry is right-aligned. A
cursor flashes under the last digit entered. The C key deletes the digit marked with the cursor. The
NULLSTELL key cancels the entry without accepting new input values, existing values are retained. The
ENTER key accepts the entered value and switches back to the application program.
The specification of whether point, decimal point or no decimal separation is made in the setting mode
(Setting mode > Terminal > Display > Decimal separation, see page 14). The input field can only be
described up to the specified number of characters, further input is not displayed and is not accepted.
Alphanumeric fields: The number keys are also assigned to letters (uppercase only) and characters in
multiple assignment. The o (zero) key is followed, for example, by +, - and the space character. In
addition, the SPECIAL CHARACTER button is available.
If a number key is pressed again within one second after it has been pressed, the characters assigned
to the key are activated on a rolling basis. If no further key is pressed within one second, the called
character is accepted and the cursor moves one position further.
Pure numerical entries can be made directly one after the other without waiting time, as long as a
number is not entered several times in succession. A cursor flashes under the position to be entered.
Use the F key and the TARE key to move the cursor left and right. The C key deletes the last character to
the left of the cursor or the character under which the cursor is flashing.
The ZEROING key cancels the entry without accepting new input values, existing values are retained.
The ENTER key accepts the entered value and switches back to the application program. The input field
can only be described up to the specified number of characters, further input overwrites the last
character.
3.3 Display screen
The display shows different views depending on the situation.
It is divided into the following display fields:
Additional display
Displays e.g. BMI, gross, net. Can be switched on with the F key according to the program settings.
Toolbar
Shows information about the status of the active measurement loop.
Display panel
Displays weight value, dimension indicator.
Secondary display Toolbar
Display panel
3. Input and control