Soehnle 7811 Series, Руководство по эксплуатации

Страница: 14 / 32

14
5.1 Power On Zeroing
At each power-on, the weight value transmitted by the load receptors is set to zero as long as it is less
than 50% of the max. weighing range. This tares the empty bed and the weight display goes to zero.
5.2 Manual zeroing
Manual zeroing corrects small deviations from the zero point, e.g. due to dirt on
the balance. The following character appears in the toolbar when zero is
displayed: >0<.
Zero setting range not verifiable: -1 to +3% of the weighing range.
If zeroing is not possible, the error message „Above zero range“ or „Below zero
range“ appears for two seconds.
5.3 x10 (times 10)-Display
Displays the weight value with a further decimal in 10 times higher resolution.
Press the ENTER and then the ZERO button simultaneously to switch to the x10
display.
As long as the 10 times higher display is selected, x10 appears in the toolbar.
The function is deactivated when the unit is switched off.
5.4 Weighing and taring
Display view
5.5 Weighing with determined taring
Determination and taring of a bed weight without patient.
Place the empty bed on the scale, including bed linen. Press the TARE key. The tare value is stored, the
weight display goes to zero. Now the patient can be put to bed. The weight is displayed with the note
Net.
Display value in tare memory
To display the tare memory, press the INFO key, then the TARE key.
The ZEROING key ends the display.
Manually changing the tare value afterwards
Display tare value by pressing the INFO key, then the TARE key. Enter the new value using the KEYPAD.
The ZERO key cancels the entry, existing value is retained or new tare value is saved by pressing the
TARE key. Confirm with the ENTER key and return to the application program.
5. Functions