USER GUIDE ST32BV
ADJUSTMENT OF THE CAMBER
USE THE ECCENTRICS AT THE BOTTOM:
MORE POSITIVE
MORE NEGATIVE
STANDARD ADJUSTMENT
(Corresponds to fig4)
INCREASE THE CAMBER
(fig 4)
Use the same position fig 4 and change the eccentric of 1° by the eccentric of 2°.
REDUCE THE CAMBER
(fig 3)
Use position fig 3.
LEFT
FIG 3
Eccentrics at the bottom:
The mark is positioned towards the
outside of the chassis.
Eccentrics at the bottom :
The mark is positioned towards
the inside of the chassis.
FOR HIGH DEGREES ECCENTRICS TO BE USED IN EXTREME CONDITIONS,
REFER TO THE ITAKA CATALOGUE
FIG 4
LEFT
RIGHT
RIGHT
NOTE:
-
Some negative camber generally improves the performances of the ST32BV.
10.4 ADJUSTMENT OF PARALLELISM
EDITION : JANUARY 2010
MAN038.011
- 20 –