USER GUIDE ST32BV
4- ASSEMBLY OF THE STEERING COLUMN AND STEERING WHEEL.
- 7 –
THE SET CONSISTS IN:
One plastic steering column support (1).
One steering wheel support (2).
Two nassau panel supports
(3).
One steering column (4).
One steering column support (5).
3
2
4
1
5
Pict. 1
6
Two steering tie rods + ball joints (6).
Raise the set as in picture 1.
Pict
.
2
3
1
2
4.1 ASSEMBLY OF THE STEERING COLUMN
SUPPORT
(PIC 2)
Place the steering column support on the two pins
canons (1) and (2).
Put the screws (3) + nylstop bolts as indicated in
picture 2.
Tighten.
4.2 ASSEMBLY OF THE STEERING COLUMN
(PIC 3)
Insert the threaded end of the steering column in
the ball joint (4).
Place the bolt (5).
Tighten.
Pict 3
5
4.3 ASSEMBLY OF THE TIE-RODS
(PIC 4)
Pict. 4
Inner holes
7
6
After cutting the tie-wrap maintaining the stub axles:
Place the ball joints (6) above the stub axle arm
(7).
Insert the screw in the outer hole of the stub axle
arm.
Place the washer on top of the ball joint and insert
the screw.
Place the bolt and tighten.
EDITION : JANUARY 2010
MAN038.011