USER GUIDE ST32BV
10.3-ADJUSTMENT OF THE CAMBER AND OF THE CASTER
DESCRIPTION OF THE ECCENTRIC.
- 19 –
ADJUSTMENT OF THE CASTER
STANDARD ADJUSTMENT
(fig 1)
1° eccentrics place in high caster position (fig 1).
INCREASE THE CASTER
(fig 1)
2° eccentric in high caster (fig 1) position.
In extreme conditions, use 3°, 4° or more eccentrics.
REDUCE THE CASTER
(fig 2)
2°ou 3° eccentric (even more in extreme conditions) in low caster position.
diam. 4 mm pin on the fork
Marked slot
1 for 1°
Eccentric
HIGH CASTER
LOW CASTER
FRONT
FRONT
TOP
BOTTOM
FIG 2
REAR
LEFT
RIGHT
FIG 1
TOP
RIGHT
LEFT
BOTTOM
REAR
Eccentrics on top:
Eccentrics on top:
The mark is positioned in front of the Ø4 mm
pin.
The mark is positioned on the opposite side of
the Ø4 mm pin.
(Towards the front of the chassis)
(Towards the rear of the chassis) .
EDITION : JANUARY 2010
MAN038.011
