socomec SUNSYS PCS2 IM UL Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 92

background image

6

EN

SUNSYS PCS2 IM UL Power Conversion System and Storage with Islanding Mode from 33 to 200 kVA - Ref.: IOMSUNPCXX07-EN 01

1. SAFETY STANDARDS

This user manual specifies installation and maintenance procedures, technical data and safety instructions for
SOCOMEC products. For further information visit the Socomec website: www.socomec.com.

The input and output circuits are isolated from the enclosure; the system grounding, when
required by Sections 690.41, 690.42, and 690.43 of the National Electric Code, ANSI/NFPA 70, is
the responsibility of the installer.

The wiring methods in accordance with the National Electrical Code, ANSI/NFPA 70 and
Canadian Electric Code (CEC) are to be used.
All national standards applicable to batteries must be observed.

CAUTION!
To reduce the risk of fire, connect only to a circuit provided with 170 amperes maximum branch-
circuit overcurrent protection in accordance with the National Electrical Code, ANSI/NFPA 70.

This inverter complies with Part 15 of the FCC Rules Operation so it must be able to handle any
interference and it must accept any interference received, including interference that may cause
undesired operation.

Overcurrent protection for the AC circuit is to be provided by others.

Before carrying out any operations read the interconnection manual and Battery Energy System
(BES) safety instructions carefully, in order to work under safe conditions.

If the Battery Energy System (BES) is not supplied by SOCOMEC, overcurrent protection for the
BES is to be provided by others.

NOTE!
Any work carried out on the equipment must be performed by skilled, qualified technicians.

NOTE!
Before carrying out any operations on the unit read the installation and operating manual care-
fully.
Keep this manual safe for future reference.

DANGER!
Failure to observe safety standards could result in fatal accidents or serious injury, and damage
equipment or the environment.

CAUTION!
If the unit is found to be damaged externally or internally, or any of the accessories are damaged
or missing, contact SOCOMEC.
Do not operate the unit if it has suffered a violent mechanical shock of any kind.

NOTE!
Install the unit in accordance with clearances in order to prevent access to handling devices and
guarantee sufficient ventilation (see Environmental requirements chapter).

NOTE!
Only use accessories recommended or sold by the manufacturer.

NOTE!
When the equipment is transferred from a cold to a warm place wait approx. two hours before
operating the unit.

DANGER! Live device! RISK OF ELECTRIC SHOCK!
SUNSYS PCS

2

IM is connected to two separately protected power supplies:

1) DC cable - BES power supply
2) AC cable - Power from the mains network, supplied by the electricity company

NOTE!
Before cleaning, performing maintenance work or connecting appliances to the unit, switch the
unit off and disconnect all power sources.

«
...
4
5
6
7
8
...
»

Содержание SUNSYS PCS2 IM UL Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для SUNSYS PCS2 IM UL Series

Бренд: U-Line Страницы: 3

Бренд: jbc Страницы: 12

Бренд: IVT Страницы: 40

Бренд: Milwaukee Страницы: 9

Бренд: Power Adhesives Страницы: 16

Carlyle Tools 6-701A

Бренд: Napa Страницы: 16

Airetool 2055-R Series

Бренд: Apex Tool Group Страницы: 12

Бренд: Intec Controls Страницы: 3

Бренд: Pulsar Страницы: 4

Бренд: easydriver Страницы: 13

Бренд: Ferm Страницы: 120

Бренд: Hama Страницы: 12

Бренд: Tohnichi Страницы: 12

GVE 174 N1 PLUS

Бренд: F.F. Group Страницы: 64

Бренд: Orange Electronic Страницы: 13

Бренд: POWER USB Страницы: 9

Touch Line SCU.VDR03.BLG14

Бренд: Bellcome Страницы: 20

Бренд: Knoll Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды