54
EN
SUNSYS PCS2 IM UL Power Conversion System and Storage with Islanding Mode from 33 to 200 kVA - Ref.: IOMSUNPCXX07-EN 01
9. FIRST START-UP
Before carrying out any operations on the unit read the 'Safety standards' chapter carefully.
When the SUNSYS PCS
2
IM is switched on for the first time the commissioning wizard is activated.
The commissioning wizard is an interactive procedure that guides the user through the SUNSYS PCS
2
IM ’s first start-
up procedure.
The most important steps are described below.
LANGUAGE SETTING
ACTIVATION CODE
The Activation code - four-digit code - must be entered to operate the SUNSYS PCS
2
IM in both control panels.
WARNING: If the code is not entered the ‘initial startup’ procedure cannot be completed and the
equipment will not operate.
To get the activation code call the Service Centre and give the Serial Number, displayed on the control panel.
To insert the Activation Code:
- press INSERT (a screen keyboard appears);
- insert the Activation Code;
- press
;
- press ENTER.
