socomec MASTERYS IP+, Инструкция по установке и эксплуатации

Страница: 6 / 60

MASTERYS IP+
40-60 kVA 3/1
IT
ALIANO
ENGLISH
6
IOMMASIPXX07-GB 02
2.1 IMPORTANT.
• This document provides important instructions for the safe use, movement and connection of the MASTERYS™ un-
interruptible power system (UPS).
• SOCOMEC UPS retains the full and exclusive ownership rights over this document. Only a personal right to utilize
the document for the application indicated by SOCOMEC UPS is granted to the recipient of such document. All
reproduction, modifi cation, dissemination of this document whether in part or whole and by any manner are
expressly prohibited except upon Socomec’s express prior written consent.
• This document is not a specifi cation. SOCOMEC UPS reserves the right to make any changes to data without prior
notice.
• The unit must be installed and activated only by qualifi ed technical personnel and authorised by SOCOMEC UPS.
The UPS MUST only be moved by two people at least bt the mean of a forklift.
• The unit must remain in a vertical position in all circumstances.
• Connect the PE ground conductor fi rst before you make any other connection.
• Do not expose the UPS to rain or liquids in general. Do not introduce external bodies.
• If the UPS is not equipped with automatic sectioning against back feed or if the switch is external to the UPS, affi x
a label bearing the following words on all the external switches of the UPS power supply:
• Keep this manual handy for future consultation.
• If the unit fails, it must be repaired only by authorised technicians that have been specially trained for this pur-
pose.
• This equipment conforms to the European Community directives for professional equipment and bears the ap-
proval mark
• The UPS requires three-phase plus neutral input connections (3P+N).
• The output neutral of the transformer is not connected to the ground. The internal isolation transformer modifi es
the neutral arrangements of the system.
WARNING!
The output neutral of the transformer is not connected to the ground.
• Before connecting any external battery cabinet, ensure that it is fully compatible with the model of UPS it is to be
used with.
• The use of external battery cabinets not supplied by the manufacturers is not recommended.
SAFETY
2