SNR SNR-VP-6020, Руководство пользователя

Страница: 35 / 44

Phone number
Call Mode
Destination
Port
Alias
Dial-Peer
There are two types of matching conditions: one is full matching,
the other is prefix matching. In the Full matching, you need input
your desired phone number in this blank, and then you need dial the
phone number to realize calling to what the phone number is
mapped. In the prefix matching, you need input your desired prefix
number and T; then dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The prefix number
supports at most 30 digits
Select SIP or IAX2 protocol
Set Destination address / phone number. This is optional config
item. If you want to set peer to peer call, please input destination IP
address or domain name. If you want to use this dial rule in SIP2
line, you need input 255.255.255.255 or 0.0.0.2 in it.
Set the Signal port, the default is 5060 for SIP
Set alias. This is optional config item. If you don’t set Alias, it will
show no alias.
Please input different alias, there are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce
dialing number length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) rep: It means that phone will replace the number with length and number appointed.
You can refer to the following examples of different alias application to know more how to use
different aliases and this dial rule.
Set suffix, this is optional config item. It will show no suffix if you
Suffix
Delete Length
don’t set it.
Set delete length. This is optional config item. For example: if the
delete length is 3, the phone will delete the first 3 digits then send
out the rest digits. You can refer to examples of different alias
application to know how to set delete length.
Introduction of how to set up dial-peer to implement switch between multi- SIP lines
9T mapping: If you have registered a Public SIP server and set dial-peer according to the above
table
，
all calls will be sent via public server when you press the numeric key “9” in front of
dialing destination phone numbers.
8T mapping: If you have registered a Private SIP server and set dial-peer according to the
above table
，
all calls will be sent via private server when you press the numeric key “8” in
front of dialing destination phone numbers.
Examples of different alias application
You need set phone number,
Destination, Alias and Delete Length.
Phone number is XXXT, Destination
is 255.255.255.255 and Alias is del.
Any phone No. that starts with your
If you dial “93333”,
the SIP2 server will
set phone number will be sent via receive “3333”
SIP2 line after the first several digits
of your dialed phone number are
deleted according to delete length.
35