SNR SNR-VP-6020, Руководство пользователя

Страница: 18 / 44

Local SIP Port
Domain Realm
Phone Number
Register Expire Time
NAT Keep Alive
Interval
RFC Protocol Edition
DTMF Mode
Server Type
Encrypt Key
User Agent
Forward Type
Conference Number
Set your Local SIP port, the default is 5060.
Set the sip domain if needed, otherwise this VoIP Phone will use the
proxy server address as sip domain automatically. (Usually it is
same with registered server and proxy server IP address).
Input the phone number assigned by your VoIP service provider.
Phone will not register if there is no phone number configured.
Set expire time of SIP server register, default is 60 seconds. If the
register time of the server requested is longer or shorter than the
expire time set, the phone will change automatically the time into
the time recommended by the server, and register again.
Set examining interval of the server, default is 60 seconds.
Select SIP protocol version to adapt for the SIP server which uses
the same version as you select. For example, if the server is
CISCO5300, you need to change to RFC2543, else phone may not
cancel call normally. System uses RFC3261 as default.
Select DTMF sending mode, there are three modes:
DTMF_RELAY
DTMF_RFC2833
DTMF_SIP_INFO
Different VoIP Service providers may provide different modes.
Select the special type of server which is encrypted, or has some
unique requirements or call flows.
Set the key for encryption
Set the user agent if have, the default is VoIP Phone 1.0
Select call forward mode, the default is Off
Off
：
Close down calling forward

Busy
：
If the phone is busy, incoming calls will be forwarded to
the appointed phone.

No answer
：
If there is no answer, incoming calls will be
forwarded to the appointed phone.

Always
：
Incoming calls will be forwarded to the appoint
phone directly, and the phone will not ring.
Set the special phone number of 3 way calling.
Forward Phone Number Appoint your forward phone number.
Enable Conference Num Enable/Disable the function which uses SIP server to realize 3 way
Enable Register
talking, not realized by our system.
Start to register or not by selecting it or not.
SIP(Default Protocol) Use SIP protocol as default dial protocol
18