SNR SNR-VP-6020, Руководство пользователя

Страница: 23 / 44

Shows the outside WAN port IP address and the inside LAN port IP address.
Outside IP
Inside IP
Set the outside Wan port IP address of DMZ.
Set the inside LAN pot IP address of DMZ
Click the Add button to add new table; click the Delete button to delete the selected mapping
table.
4.2.4.3. Net Service
Net Service
set web browse port, the default is 80 port
，
if you want to enhance
system safety
，
you'd better change it into non-80 standard port
；
HTTP Port
Telnet Port
RTP Initial Port
RTP Port Quantity
Example:
The IP address is 192.168.1.70. and the port value is 8090, the
accessing address is http://192.168.1.70:8090
Set Telnet Port, the default is 23.You can change the value into
others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the
accessing address is telnet 192.168.1.70 8023
Set the RTP Initial Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is 200.
DHCP Leased Table IP-MAC mapping table. If the LAN port of the phone connects to a
device, this table will show the IP and MAC address of this device.
Notice:
1
）
You need save the configuration and reboot the phone after set this page.
2
）
If you modify the port of Telnet and HTTP, you would better set the value more than 1024
because the port value less than 1024 is system port reserved.
3
）
if you set 0 for the HTTP port, it will disable HTTP service.
23