SNR SNR-VP-6020, Руководство пользователя

Страница: 19 / 44

4.2.3.2. IAX2 Config
Register Status
IAX2 Config
Shows if the phone has been registered the IAX2 server or not.
IAX2 Server Addr Input your IAX2 server address.
IAX2 Server Port
Account Name
Set your IAX2 server port, the default is 4569.
Input your IAX2 register account name.
Account Password Input your IAX2 register password.
Phone Number
Local Port
Input your assigned phone number (usually it is same you’re your
IAX2 account name ).
Set your local sport
，
the default is 4569.
Voice Mail Number Specify the voice mail’s number.
Voice Mail Text
Echo Test Number
Echo Test Text
Refresh Time
Enable Register
Enable G.729
IAX2
(Default Protocol)
Specify the voice mail’s name.
Set echo test number. If IAX2 server supports echo test, and echo test
number is non- numeric, system could set an echo test number to
replace the echo test text. So user can dial the numeric number to test
echo voice test. This function is provided with server to make
endpoint to test whether endpoint could talk through server normally.
Specify echo test text’s name.
Set expire time of IAX2 server register, you can set it between 60 and
3600 seconds.
Start to register the IAX2 server or not by selecting it or not.
Enable or disable code G.729 by selecting it or not
Select it to make all outgoing calls through the IAX2 server by
default. If you also need make a call through SIP server, you can
make prefix in dial peer setting to realize SIP calling.
Note: any incoming call can be from both IAX2 and SIP.
；
19