SnowWolf AlphaBlower 36-106-P, Руководство по эксплуатации и техническому обслуживанию

Страница: 40 / 76

38
AlphaBlower Operation and Maintenance Manual
Maintenance
Lubrication (Cont’d)
Ball Bearings
Figure 3
The snow blower is equipped with two shaft
bearings (Item 1) for the axle suspension and one
bearing (Item 2)
[Figure 3] for the fan shaft. The
bearings are equipped with grease zerks and filled
with grease and have integrated seals. Push the
grease in carefully to avoid damage to the seals.
Slew Ring
Figure 4
The slew ring (Item 1) [Figure 4] is equipped with
four grease zerks. Use grease of the type Mobil
Mobilith SHC 220 or equivalent. Rotate the chute
around and grease repeatedly to distribute the
grease around the entire slew ring.
If the clearance between the chute and the fixing
bracket for the chute is too large (or if the contact
face facing the slew ring is uneven) this could
result in an uneven load on the slew ring, resulting
in slow operation or inability to rotate. If this
happens, loosen all the bolts on the slew ring. Fill
any clearances using shims or washers before
tightening the bolts again.
1
2
1