SnowWolf AlphaBlower 36-106-P, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 76

19 AlphaBlower Operation and Maintenance Manual
Operation
Tractor Requirements
PTO Revolutions
NOTE: The 36-106-P snow blower is intended
for a PTO operating at 1000 rpm.
Entering and Exiting the
Tractor
Entering The Operator’s Position
Use the tractor’s safety treads, handles and steps
to enter the operator’s position.
When in the operator’s position, fasten the seat
belt, start the engine and release the parking
brake.
Exiting The Operator’s Position
AVOID SERIOUS INJURY OR DEATH
Before servicing the snow blower:
• Always park on a flat level surface.
• Lower the tractor’s three-point hitch and
place snow blower flat on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
• Exit the tractor.
SEE TRACTOR’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.
Park the tractor / snow blower on a flat level
surface.
Place all controls in neutral, engage the park
brake, stop the engine and wait for all moving
parts to stop. Leave the operator’s position.
TRACTOR REQUIREMENTS
Power Input (min/max) 150 - 350 HP
Hitch Type Cat 2, 3 or 4
REVERSING FRONT MOUNT
36-106-P 1000 RPM 1000 RPM