SnowWolf AlphaBlower 36-106-P, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 76

18
AlphaBlower Operation and Maintenance Manual
Operation
AlphaBlower Inspection
Daily Inspection
NOTE: Inspect the snow blower by performing
a walk around daily before and after
use. Use the following inspection
checklist as a guideline.
Check the following items every 10 hours of
operation:
• Verify that the snow blower is properly
connected to the tractor.
• Check that all shields and guards are in place.
• Check for damaged or leaking hydraulic hoses
or fittings. Replace if necessary.
• Check the cutting edge for wear or damage.
Replace if necessary.
• Check that all cotter pins that retain pivot/
anchor pins are in place and not damaged or
missing.
• Check the snow blower to ensure that all
components are secure and that all bolts and
nuts are thoroughly tightened.
• Check the snow blower mounting hardware for
wear or damage. Inspect the pins and mounts
for wear or damage. Repair or replace
damaged parts if necessary.
• Check that all bearings turn freely. Replace
any that are rough or seized.
• Check that the PTO driveline is securely fasten
to the snow blower and to the tractor.
• Check the oil level in the gearbox.
Monthly Inspection
• Inspect the snow blower for cracks, bends, or
excessive wear.
• Check gauge wheels for wear and PSI if not
foam filled.
• Check that all bolts are tight.
• Check the cutting edge and mounting plate for
cracks or damage. Replace if necessary.
• Check the drift cutters for cracks or damage.
Replace if necessary.
• Check hydraulic lines, connections and fittings
for hydraulic oil leaks. Repair or replace
damaged parts if necessary.
• Check for damaged or missing decals.
Replace if necessary.
• Lubricate as required.
AVOID SERIOUS INJURY OR DEATH
Before servicing the snow blower:
• Always park on a flat level surface.
• Lower the tractor’s three-point hitch and
place snow blower flat on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
• Exit the tractor.
SEE TRACTOR’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.