background image

3

• Do not touch plug with wet hands.
• Keep cord away from heat and sharp edges.
• Do not spray electrical apparatus and wiring.

Risk of explosion

• Do not spray flammable liquids.
• Do not use acids, bases, solvents, or any flammable 

material in this product. These substances can cause 
physical injuries to the operator and irreversible damage to 
the machine.

Additional safety instructions

• High pressure: keep clear of nozzle.
• Injection hazard: equipment can cause serious injury if the 

spray penetrates the skin.

• Do not point the gun at anyone or at any part of the body.
• In case of skin penetration, seek medical aid immediately. 
• Before servicing, cleaning or removing any parts, shut off 

the power and relieve pressure.

• This machine is not suitable for connection to the potable 

water mains.

Product Description

Purpose

• The high pressure cleaner is intended for residential use to 

clean vehicles, machines, buildings, facades, etc.

Areas of application

• Never use the machine in potentially explosive areas under 

any circumstances!

• The operating temperature must be between 32ºF (0

º

C) and 

104ºF (+40

º

C).

• The machine consists of an assembly with a pump, which 

is encased in a shock-absorbing housing. To provide the 
operator with an optimal working position, the machine is 
equipped with a spray wand and a non-slip handle grip, 
whose shape and configuration comply with applicable 
regulations. 

• Do not cover or modify the spray wand or the spray nozzles 

in any way.

• The high pressure cleaner is designed to be used with cold 

or lukewarm water; higher temperatures can damage the 
pump.

• Do not use water that is dirty, gritty or contains any 

chemical products, as these could impair operation and 
shorten the life of the machine.

Safety Symbols

The following table depicts and describes safety symbols that 
may appear on this product. Read, understand, and follow all 
instructions on the machine before attempting to assemble 
and operate.

Symbol

Description

SAFETY ALERT

 – indicates 

a precaution, a warning or 

a danger.

READ THE OPERATOR’S 

MANUAL(S)

 Read, understand 

and follow all instructions in the 

manual(s) before attempting to 

assemble and operate.

For protection against injury, 

wear safety goggles and  

ear protection.

To reduce the risk of injury, 

user must keep all bystanders 

at least 15 m away.

Double insulation.

Electrical shock hazard.

SWITCH OFF!

 Remove plug 

from outlet immediately if the 

cord is damaged or cut.

Machine not suitable for  

connection to the potable  

water mains.

Sound power level is 

96 dB(A).

WARNING!

 Keep out of rain 

and away from wet areas.

Содержание PRESSURE JOE SPX1000RM











Отзывы: