background image

Using the accessories

m

WARNING! 

High pressure jets can be dangerous if 

subject to misuse. The jet must not be directed at persons, 
pets, live electrical equipment or the appliance itself.

• The washer is equipped with an adjustable nozzle.
• Water jet can be adjusted from low pressure fan spray to 

high pressure pencil spray by turning the nozzle as shown 
(Fig. 10).

m

WARNING! 

Do not adjust the nozzle while the trigger

is squeezed. Failure to do so could result in damage.

Recommended cleaning procedure

• For additional cleaning power, a detergent spray bottle 

(Model SPX1DT) attachment is available as an add-on 
accessory for the SPX1000. Visit www.snowjoe.com to 
purchase.

• Load the bottle with a suitable, non-corrosive detergent and 

attach it the spray gun (Fig. 11).

• Using the fan spray, dissolve dirt by applying the detergent 

from the bottom to the top of the dry surface to be cleaned.

 

NOTE:

 Wetting the surface first is not recommended as it 

dilutes the detergent and reduces its cleaning ability.

• Allow the detergent to remain on the surface for a short 

time before rinsing with the pressure washer. Do not allow 
the detergent to dry on the surface.

Shutting down

1. 

Turn the switch to the OFF (0) position and unplug the 
power cord from the outlet.

2. 

Turn off the water source.

3. 

Press trigger to release water pressure.

4. 

Disconnect the garden hose from the water inlet on the 
unit.

5. 

Disconnect the high pressure hose from the high pressure 
outlet.

6. 

Release trigger and engage the gun safety lock.

m

WARNING! 

Turn off water supply and squeeze trigger 

to depressurize the unit. Failure to do so could result in 
personal injury due to discharge of high pressure water.

Taking a break

If you are taking a break of five minutes or more between 
cleaning tasks: 

• Engage the gun safety lock.
• Turn the switch to the OFF (0) position.
• Unplug the power cord from the outlet.

Storage

m

CAUTION! 

Always store your pressure washer in a 

location where the temperature will not fall below 32ºF (0ºC). 
The pump in this machine is susceptible to permanent damage 
if frozen. 

FREEZE DAMAGE IS NOT COVERED BY THE 

WARRANTY.

• Store in a dry, covered area where the weather cannot 

damage the machine.

• It is important to store this product in a frost-free area.
• Always empty water from all hoses and pump before 

storing.

m

CAUTION! 

The use of a pump protector is 

recommended to prevent cold weather damage during  
storage over the winter months.

Winterizing and long-term storage

If you must store your pressure washer in a location where 
the temperature is below 32ºF (0ºC), you can minimize the 
chance of damage to your machine by utilizing the following 
procedure:

•  Disconnect all water connections.

• 

Turn on the machine for a few seconds until the remaining 
water in the pump exits. Turn off immediately.

• 

Do not allow the high pressure hose to become kinked.

Fig. 10

High

Low

Fig. 11

Detergent spray bottle 

(Model SPX1DT)

7

Содержание PRESSURE JOE SPX1000RM











Отзывы: