background image

6

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all 

instructions on the machine before attempting to assemble and operate.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

READ THE OPERATOR'S 

MANUAL(S) – 

Read, understand 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – 

Indicates a 

precaution, a warning or a danger.

Wear hearing protection. 

Wear eye protection. 

Wear breathing protection.

WARNING!

 Do not expose the 

unit to rain or wet conditions. 

Keep dry.

CAUTION! 

Beware of stones and 

other foreign objects that could 

be thrown from the appliance.

DANGER!

 Cutting/dismemberment 

hazard – Keep hands away from the 

rotating auger. Do not use hands to 

unclog rotor housing. Stop motor 

before removing debris.

DANGER! 

Cutting/dismemberment 

hazard - Keep feet away from the 

rotating auger.

Symbols

Symbols

Descriptions

Descriptions

 

Indoor use only. Only use battery 

charger indoors.

Do not use hands to unclog chute.

Keep hands, feet and clothing 

away from the rotating auger to 

avoid injury. 

Keep bystanders and children a 

safe distance (at least 33 ft/10 m) 

away from the work area.

WARNING!

 Always turn the machine 

OFF and remove the safety key 

before conducting inspection, 

cleaning and maintenance.

Wear protective gloves and non-slip 

footwear when using the machine 

and handling debris.

Содержание iON8024-CT-RM



























Отзывы: