SNOWJOE iON8024-CT-RM, Руководство оператора

Страница: 13 / 26

12
LED Headlights (Fig. 12)
Two LED headlights are located on the front panel. To activate
the LED lights:
1. Press the LED light button on the control panel.
2. The LED lights can be independently adjusted by moving
either up or down to desired angle, as shown.
NOTE: After you have finished using your snow blower,
remember to turn OFF the light switch.
Auger Trigger (Right-Handle) (Fig. 13)
1. Press the safety button, then squeeze the auger trigger
against the right-handle to engage the auger and start
snow throwing action.
2. Release auger trigger to stop.
Drive Trigger (Left-Handle) (Fig. 1)
Squeeze the drive trigger against the left-handle to engage
the wheel drive for propelling unit. Forward speed will vary
according to snow depth and moisture content. Release
trigger to stop movement.
NOTE: When traveling to or from the area to be cleared, press
down on the handle grips enough to raise the front of the
unit slightly off the surface. Engage the drive trigger without
engaging the auger trigger.
Power Switch (Fig. 15)
The power switch is operated with a removable key. The
power switch has two positions: ON and OFF. Always remove
key when unit is unattended.
Safety Switch (Fig. 15)
Rotate the safety switch clockwise and pull up the safety
switch to engage the motors/electronics. Push the safety
switch down to stop all motors/electronics.
Fig. 12
LED Lights
LED Lights button
Fig. 13
Auger trigger (Right-handle)
GO
Safety
button
Auger
trigger
2
1
Fig. 14
Drive trigger (Left-handle)
Drive
trigger
2
GO
ON
OFF
Fig. 15
Key/Power switch Safety switch