Safety
/LW1R5HY
5
-XO\
WARNING
Never exceed 45 mph (72 km/h) when loaded
spreader is attached to vehicle. Braking
distances may be increased and handling
characteristics may be impaired at speeds
above 45 mph (72 km/h).
WARNING
• Always make sure personnel are clear of
areas of danger when using equipment.
• Never attempt to lift a unit with material in it.
• Always inspect unit for defects and
replace any broken, missing or worn parts
immediately.
• Always check areas to be spread to be sure
no hazardous conditions or substances are
in the area.
SAFETY DEFINITIONS
NOTE: Indicates a situation or action that can lead
to damage to your snowplow and vehicle or other
property. Other useful information can also be
described.
CAUTION
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It may also be used to alert
against unsafe practices.
WARNING
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious personal injury.
CAUTION
If rear directional, CHMSL light, or brake
stoplights are obstructed by the spreader, the
lights shall be relocated, or auxiliary directional
or brake stoplights shall be installed.
CAUTION
During the hopper installation we recommend
the addition of an OSHA compliant Backup
Alarm. This alarm is required for OSHA
governed employers.
SAFETY PRECAUTIONS
Improper installation and operation could cause
personal injury and/or equipment and property
damage. Read and understand labels and the
Owner's Manual before installing, operating, or
making adjustments.
WARNING
Overloading could result in an
accident or damage. Do not exceed
GVWR or GAWR ratings as found
on the driver-side vehicle door
cornerpost. See Loading section to determine
maximum volumes of spreading material.
WARNING
Do not install the control for this product in
the deployment path of an air bag. Refer to
vehicle manufacturer's manual for air bag
deployment area(s).
WARNING
• Driver to keep bystanders minimum of
feet away from operating spreader.
• Before working with the spreader, secure all
ORRVH
IL
WWLQJFORWKLQJDQGXQUHVWUDLQHGKDLU
• Before operating the spreader, verify that all
safety guards are in place.
• Before servicing the spreader, wait for
conveyor, auger, and spinner to stop.
• Do not climb into or ride on spreader.
WARNING
Unit must be strapped down and locked into
position before operating or transporting.
WARNING
Never operate equipment when under the
LQÀXHQFHRIDOFRKROGUXJVRUPHGLFDWLRQVWKDW
might alter your judgment and/or reaction time.
Содержание SP-2200
