SNOWDOG COMPACT B10ZE WL, Руководство пользователя

Страница: 12 / 16

12
Adjusting the brake caliper
Fully loosen the tension of the brake cable on the lever, as
described in paragraph 17.6.1. Ensure ease of pushing and
return to the starting position of the lever and the parking brake
cable.
At the complicated movement of the lever parking brake,
lubricate or replace cable. If the parking brake lever is in the
starting position, and the cable has slack - adjust the tension of
the cable on the parking brake caliper. Loosen the bolt 3 and pull
the cable to remove slack. Do not create tension on the cable.
Tighten the bolt and check the operation of the parking brake
lever.
Turn the screws 1 to adjust the position of the caliper to the
brake disc. The fixed brake shoe should be parallel to the brake
disc pad surface. Adjust minimum possible distance between the
fixed brake pad and brake disc.
It`s allowed to graze on the disc brake pads is not obstructing
its rotation.
Loosen the lock nut 5. Tighten the screw 6 until touching the
movable brake pads on the brake disc. Hold the bolt 6, tighten
the locknut 5. Check the brake disk rotation. Allowed to graze on
the disc brake pads is not obstructing its rotation.
Check the movement of lever parking brake. If necessary, adjust
the tension of the cable as described in section
17.6.1
.
Check the condition of the brake pads. Limit the working of the
material thickness of the brake pads 0,02 in (5mm). 1. If the
brake pads are worn, replace them.
If the brake pads in order to adjust the brake caliper as described
in p.
17.6.1
.
Loosen the cable clamp bolt brake 3, pull the brake cable by
removing the slack and tighten the screw 3.
17.7 Brake caliper dismantling
Loosen the screws 1 and disassemble the caliper.
1. Caliper
2. Stop
3. Brake pad
4. Spring
5. Caliper cover
6. Caliper cover bolts.
17.8 Adjusting the throttle
To adjust the throttle lever to loosen the locknut 2 and
counterclockwise rotation of the adjusting screw 1. Pull the rope
so that the throttle had free running within 0,2 - 0,3 in (5-7mm).
To loosen the throttle cable, loosen the locknut 2 and clockwise
rotation of the adjusting screw 1 to loosen the cable.