SNOWDOG COMPACT B10ZE WL, Руководство пользователя

Страница: 11 / 16

11
17.5 Suspension trolleys diagnostic
The three spring trolley may turn upside-down if Snowdog is
driven over obstacles, such as logs, rocks, etc. I this case
Snowdog leans forward, looses power and speed. Do not
operate Snowdog if this happens. Return the three spring
trolley into proper position.
17.6 Parking brake
Parking brake consists of brak caliper with pads, brake disc,
brake cable and brake lever with a lock.
17.6.1 Brake actuator. Checking, service.
The brake is a combination of a steel disk on the driven shaft of
the variator, and a device that compresses the disc brake caliper
pads. The braking force is transmitted via the brake lever cable.
The parking brake is actuated by a lever with the clamp on the
left handlebar. Check the movement of lever A. It should be 0.2-
0,4in (5-10mm).
If the braking force on the lever is not sufficient, for example,
when brake pads worn out, or tensile steel cable, you need to
adjust the brake lever stroke.
To do this, loosen the locknut 1 and counterclockwise rotation of
the adjusting screw 2 pull cable so that the brake lever has a free
wheeling within 0.2-0,4in (5-10mm).
To loosen the brake cable loosen the locknut 1 and clockwise
rotation of the adjustment screw 2.
If the lever adjustment is not enough to set up the free lever
motion, adjust the brake caliper and check on the condition of
pads.
17.6.2 Brake caliper. Checking and service
Before setting up caliper loosen as much as possible the brake
cable as specified in paragraph 17.6.1
Caliper parts
1. Bolts adjust the position of the caliper (brake pads
parallel to the brake disc)
2. Fastening bolts of a caliper
3. Brake cable fixing bolt
4. Brake cable stop
5. Bolt adjusting the distance between the pads.
6. Lock nut of the adjusting bolt.