12
Press any
Scan Button
Measuring surface temperature
1. Press the EAR button for 1 second to switch the
thermometer on. Following a successful self test, the
device emits two short beeps.
2. Then press the “MEM” and EAR buttons
simultaneously for 3 seconds to switch to the Object
temperature mode. The symbol appears in the
display.
3. Press and hold the EAR button or the HEAD button
and point the sensor tip towards the object or liquid
to be measured (never immerse in liquids),
maintaining a distance of 3 cm.
4. Release the EAR button or the HEAD button. The
end of the measuring time is signaled with a short
beep and the measured value appears on the display
and is spoken.
5. Please note that the displayed temperature is the
measured and not the adapted surface temperature.
It is not the same as the forehead/ear temperature.
6. To switch back to the Ear/Forehead thermometer
mode, press the “MEM” and EAR buttons
simultaneously for 3 seconds until the symbol
disappears and there is a short beep. By switching
the thermometer off and on again, it automatically
exits the Object temperature mode.
Using the Thermometer
