6
Setting Volume
The unit in which the temperature will be displayed,
the date and the time.
When the thermometer is used for the first time and
each time the batteries are changed, the date and time
are displayed in the format 1-1 00:00 during the basic
set-up (after the self test). Set each of the following
settings in turn: volume, unit in which the temperature
will be displayed, date and time. To set the device,
proceed in stages:
Volume
(U01 – lowest setting, U06
– highest setting),
Unit – year – month – day – hours –
minutes
(there is no voice output when setting date
and time).
1. Press the SET button for 5 second to switch
the thermometer on. The device performs a
brief self test: all elements of the display are
shown for approx. 1 second.
Following a successful self test, the device
emits two short beeps. In Standby mode, the
date and time are shown and “--” is displayed.
2. Turn the device on and the speaker symbol shows
whether the
Volume function
is on or off. Press the
"SET" button to turn the Volume function on and off.
When you turn the voice function on, a short beep
sounds (speaker symbol visible = voice function on;
speaker symbol not visible = voice function off).
Press the “SET” button to change the volume.
• VOL 01
• VOL 02
• VOL 03
• VOL 04
• VOL 05
• VOL 06
3. Press the “MEM” button to confirm entry.
Setting Volume, °C/°F and Date/Time
