Snorkel S3010E, Руководство по запчастям и обслуживанию

Страница: 28 / 86

t s i L k c e h C e c n a n e t n i a M e v i t a t n e v e r P r i a p e R & e c i v r e S - 3 n o i t c e S
Page 3-5
3-3 P
REVENTATIVE
M
AINTENANCE
C
HECK
L
IST
COMPONENT INSPECTION OR SERVICES INTERVAL Y N R
Battery
System
Check electrolyte level Daily
Check battery cable condition Daily
Charge batteries Daily
Check charger condition & operation Daily
Check specific gravity 6m
Clean exterior 6m
Clean terminals 6m
Hydraulic Oil*
Check oil level Daily
Change Filter 2y
Drain and replace oil 2y
Hydraulic System
Check for leaks Daily
Check hose connections 30d
Check hoses for exterior wear 30d
Drive Motors Check for operation and leaks Daily
Emergency Down Check procedure for Emergency Down Daily
Hydraulic Pump
Check for fitting leaks Daily
Wipe clean 30d
Check for leaks at mating surfaces 30d
Check mounting bolts for proper torque 6m
Controller Check condition & operation Daily
Platform Deck &
Rails
Check fasteners for proper torque Daily
Check welds for cracks Daily
Check condition of deck Daily
Check entry way closure Daily
Elevating
Assembly
Inspect for external damage, dents, loose
rivets or cracks
Daily
Check Scissor slide blocks for wear 6m
Lubricate Scissor slide channels 6m
Daily
Check Scissor and Lift Cylinder pins are
securely in place with no damage or
corrosion
Chassis
Check cables for pinch or rubbing points Daily
Check welds for cracks Daily
Check component mounting for proper
torque
6m
Lift Cylinder
Check for leaks Daily
Check for proper torque 6m
Entire Unit
Perform pre-operation inspection Daily
Check for and repair collision damage Daily
Lubricate 30d
Check fasteners for proper torque 6m
Check for corrosion; remove and repaint 6m
Labels
Check for peeling, missing, or unreadable
labels & replace
Daily
Wheels Check for loose components Daily
COMPONENT INSPECTION OR SERVICES INTERVAL Y N R
* NOTE: Use ISO #46 during summer and ISO #32 during winter.
P
REVENTATIVE
M
AINTENANCE
K
EY
Interval
Daily=each shift or every day
50h/30d=every 50 hours or 30 days
250h/6m=every 250 hours or 6 months
1000h/2y=every 1000 hours or 2 years
Y=Yes/Acceptable
N=No/Not Acceptable
R=Repaired/Acceptable
P
REVENTATIVE
M
AINTENANCE
R
EPORT
Date: _______________________________________
Owner:______________________________________
Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
Service Interval: ______________________________
Check Bearings for Oil 3m
Harness Anchor
Point
Check fasteners are secure, check for
cracks,damage or corrosion
Daily
Check stack limit switch operation Daily