Maintenance Information
■
90 Day or 150 Hour Maintenance
(Trained Service Technician)
COMPONENTS
SERVICE REQUIRED
RECOMMENDED LUBRICANT OR
FURTHER INSTRUCTIONS
Daily maintenance
Perform maintenance as per schedule
Preventive inspection
maintenance checklist
Perform inspection, complete form
Retain copy of checklist
Placards & decals inspection
Inspect using drawing and parts listing
in section 1 (repair parts)
Replace any missing or
unreadable decals/placards
Door hinges and latches
Lubricate
SAE 10W oil or spray lube
Tie rods
Check pin keeper and condition
Steer cylinder ends
Check pin keeper and condition
Batteries
Check specific gravity
1.260/1.275 at 80° F.
Platform lift capacity
Check if platform can lift maximum
load
Platform lift/lower speeds
Check smooth operation and speeds
Hydraulic return filter
5HSODFH)LOWHU
Replace if dirty
Slide pads
Check condition
Scissor arm bearings
Check condition
■
Yearly or 500 Hour Maintenance
(Trained Service Technician)
COMPONENTS
SERVICE REQUIRED
RECOMMENDED LUBRICANT OR
FURTHER INSTRUCTIONS
90 day or 150 hour maintenance
Perform maintenance per schedule
Hydraulic oil reservoir
Clean and replace fluid
Shell Tellus 32 or similar
Hydraulic return filter
Replace
After 1st. 50 hours, thereafter
at recommended interval
Hydraulic pressures
Check pressures
Platform controller
Check operation
Base controls
Check operation