Snooper syrius s600 plus, Руководство пользователя

Страница: 15 / 59

15
Return to contents
To modify the information shown:
l
Access the Menu by simply touching the Syrius Plus in the centre of the screen.
l
Press the ‘Configure’ button.
l
Press the
icon where you will see the list of options below.
l
Select the option you wish to change on the left.
l
To change a setting, simply press on the tick box to indicate which option you would like to choose.
l
Continue to select each option and select your preference.
l
Press ‘OK’ at the bottom of the screen to save your preferences.
Your chosen settings will now be saved and will appear on the screen each time you use your Syrius. If you want to switch
between your Current Speed and the Atomic Clock or the Estimated Time of Arrival and Time to Destination during your
journey simply touch the screen where either piece of information is displayed and the unit will display the alternate setting
and vice versa. However each time you power the device up the original setting will be displayed.
2.2
The Syrius Plus enables you to adjust the brightness of the display
and save two brightness settings: one for driving during the day
and one for driving at night. To adjust the brightness setting:
l
Press the centre of the display to enter the ‘Menu’.
l
Press the ‘Configure’ button.
l
Press the ‘Brightness Control’ icon.
To set the daytime brightness select ‘DAY’ by checking the tick
box with your finger and then using the and buttons to
adjust the setting.
To set the ‘NIGHT’ setting, simply check the tick box with your finger for ‘NIGHT’ and follow the same procedure. Once
you have selected the desired brightness press the ‘OK’ button at the bottom of the screen.
Note: The arrow icon in the bottom right hand corner of the display will return you to the ‘Configure’ menu if pressed
but will not store any changes you have made. You need to select the ‘OK’ button in order to save your changes.