Snooper syrius s600 plus, Руководство пользователя

Страница: 11 / 59

Return to contents
11
Installing your Syrius
The Syrius Plus comes with a windscreen bracket so that the unit can be mounted onto your vehicles windscreen.
When installing your Syrius Plus please ensure that:
l
The unit, with its built in GPS antenna has a clear view of the sky*
l
It is located in a position where you can easily view the LCD display without having to take your eyes too far from the road
ahead and that you can reach the controls safely.
l
Does not interfere with the vehicles controls
l
Does not jeopardise the drivers or passengers safety
l
You will be able to remove the device to perform downloads.
*Please Note: Some vehicles including Renault, Citroen and Peugeot may come with a ‘Heat Reflective’, ‘Metal Oxide’,
‘Athermic’ or ‘Comfort’ windscreen which may affect the performance of the built in GPS antenna. If you are unsure what
type of windscreen is fitted to your vehicle then contact your local vehicle dealer or manufacturer for further information. In
these situations you will need to purchase an extension GPS antenna, which can be positioned either on the rear parcel
shelf or outside the cabin of the vehicle. Call 0870 787 0700 and select Option 2 for further details.
PLEASE NOTE: Be careful to choose a location that does not block the drivers view or where it might endanger
the driver or passengers should your vehicle suddenly come to a stop or be involved in an accident.
Installing your Syrius using the Windscreen Suction Cup bracket
You can mount your Syrius Plus to the inside of your vehicles
windscreen using the windscreen bracket provided.
l
Clean the area where you wish to position the bracket thoroughly with
a good quality glass cleaner. This allows a more secure seal on the
windscreen.
l
Place the suction cup and bracket on the windscreen and push the
locking lever towards the windscreen to secure the bracket.
l
Adjust the angle of the bracket so that when the unit is attached to it
you can view the display and operate the controls safely.
l
Position the Syrius Plus onto the bracket, by sliding it onto it as
indicated. Remove the Syrius Plus by sliding the unit upwards and off
the bracket.
l
The Syrius Plus can be powered directly either from the internal
battery if it is fully charged or powered from the cigarette lighter
socket. To use the cigarette lighter socket, plug the smaller plug on
one end of the power cable into the socket marked DC 5V on the
back of the Syrius Plus and plug the larger plug into the cigarette
lighter socket of your vehicle.
Please Note: Only use the cigarette lighter power cable provided with the Syrius Plus. The Syrius Plus operates
on 5V not 12V and using any other cigarette lighter power cable will damage your device and void the warranty.
Locking
lever
Bracket
adjusters