Snell IQOTX80, Руководство пользователя

Страница: 6 / 25

IQOTX80/81/82/83/84/99 www.snellgroup.com
Output Configuration
RollTrack controls On/Off, Index, Source, Address, Command, Status, Sending
RollTrack outputs Unused
Input 1-8 Present
Input 1-8 Rate Unknown
Input 1-8 Loss
Input 1-8 3G
Input 1-8 HD
Input 1-8 SD
Output 1-8 laser bias OK
Output 1-8 laser bias High
Output 1-8 laser bias Low
Output Configuration
Specifications
Electrical 3 Gbps SDI, SMPTE 424M,
1.5 Gbps HD-SDI, SMPTE 292M
270 Mbps SDI, SMPTE 259MC / DVB-ASI
Connector / format BNC/ 75 Ohm panel jack on standard Snell connector panel
Return loss >-15 dB (270 Mbps, 1.5 Gbps)
>-10 dB (3 Gbps)
Output jitter SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
3G/HD-SDI 1.0 UI (10 Hz) / 0.2UI (100 kHz)
Module power 10.5 W max
(Depends on SFP fitted)
1310 nm Tx
Wavelength 1310 nm
Spectral width (FWHM) 1.5 nm (typ RMS)
Output power -2 dBm (typ), 0 dBm max
Extinction ratio >7.5:1 (typ)
Transmission distance 10 km max under worst conditions, up to 30 km max
1550 nm Tx
Wavelength 1550 nm
Spectral width (FWHM) 1 nm (max)
Output power 4 dBm max
Extinction ratio >7.5:1 (typ)
Transmission distance Up to 50 km max
CWDM wavelength Tx
Wavelength 1270 nm – 1410 nm and 1470 nm –1610 nm
Spectral width (FWHM) 1 nm (max)
Output power 2.5 dBm (typ), 5 dBm max
Extinction ratio >9:1 (typ)
Transmission distance Up to 50 km max
Issue 1 Rev 2 © 2012 Snell Limited Page 6