Snell IQOTX80, Руководство пользователя

Страница: 10 / 25

IQOTX80/81/82/83/84/99 www.snellgroup.com
System-Setup Screen
The Setup screen displays basic information about the unit. Use the functions on the screen to
restart the unit, return all settings to their factory defaults, and to change the names of the inputs.
Product: The top left part of the screen shows the various versions, options, identifiers, etc.,
associated with the product’s hardware, firmware and software and also provides a means of
setting controls to defaults or restarting the unit. Note that the Firmware release is in two parts, the
left-hand being for the Administration module FPGA and the right-hand part being for the I/O
module FPGA.
To restart the unit, simulating a power-up/power-down cycle, click Restart .
To reset all of the unit’s settings to their factory defaults, click Factory Defaults .
•
NOTE: this also clears all of the saved memory settings.
To reset all of the unit’s settings to their factory defaults, leaving user memories intact, click
Default Settings .
SFP Details: The top right part of the screen shows the details of the SFP transmitters and
receivers fitted. The Status column indicates whether the SFPs fitted are correct for the particular
product. The difference between the TX80, 81, 82, 83, 84 products is purely the wavelengths of the
transmitters fitted.
NOTE : SFP details are read only at start up so the unit must be restarted if an
SFP is changed.
Input 1-8 Name: The bottom half of the screen has entry fields for 8 Input Names . These are the
input names displayed in logging. To change a name, type the name in the text field and click S .
To return the name to its factory default, click P .
Issue 1 Rev 2 © 2012 Snell Limited Page 10