Snell IQOTX80, Руководство пользователя

Страница: 13 / 25

IQOTX80/81/82/83/84/99 www.snellgroup.com
SDI-Inputs 5-8 Screen
The SDI-Inputs 5-8 screen enables the:
•
Inputs and outputs to be configured.
•
The configuration mode to be used selected.
•
The rules governing configuration use to be specified.
SDI Inputs 5-8
•
SD/DVB-ASI (270 Mb):
•
HD (1.5Gb):
•
3G (3 Gb):
•
Others: Check one or more of these checkboxes to determine which types of signal are
deemed to be valid for a particular input. If a signal is present on the input but not selected as
valid, its status will be
Error . Others is for signals of type other than the above. Also, because
the reclockers are on the outputs , if an input is detected as present but not routed to an output,
its bit rate will be unknown and its status would be Error unless this box was checked.
•
Reclock Bypass: Check this to bypass the reclocker, which is on the output signal.
•
The Channel Ident , I/P Name , I/P State and I/P Rate are shown for each channel.
Issue 1 Rev 2 © 2012 Snell Limited Page 13