IQAES00/01/10/11
N33
IQAES00OPS 27/07/06
www.snellwilcox.com
Version 1 Issue 1
N33.19
MENU DETAILS
(see IQAES00 Menu System on previous pages)
MAIN MENU
The main or top level menu allows various sub-
menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu, the text will become reversed (white-
on-black) indicating that the mode is active. If the
mode is not available for selection the text will
remain normal.
Also refer to the block diagram on page 5 for more
information.
MAIN MENU
IQAES00 MENU
Status...
RollTrack...
Logging...
Setup...
Status
This will display various information about the
status of the inputs.
Status
Input 1
Input 2
This allows either Input or input 2 to be selected.
Input 1 and Input 2
This will reveal a display showing the status items
that may be selected.
Locked
Sample Rate
PCM
ProSumer
CRC Error
CS Mode
CS Mode Value
Input 1, Input 2
This will show details of the selected status item, in
this example it shows the sample rate.
Sample Rate
48kHz
Preset
Status Items
It may also show the following:
Locked
This indicates the lock status. It may show:
Unlocked
The unit is not locked to the input
Locked
The unit is locked to the input
Sample Rate
This will show thew sample rate of the input signal.
It may show:
No Input
No input signal detected
Unknown
The sample rate cannot be
recognized
32, 44.1, 48, 96 kHz
The detected sample rate
