www.snellgroup.com
Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion
Version 1 Issue 1
©
Snell 2009
Page 76
2. A RollCall address must be assigned to each unit. This is done in the IPI Gateway template.
3. Using the Unit Address slider bar, select the desired address for the unit.
In the IP Address field, type the IP address of the unit. To determine the IP address of the unit, on the
unit’s front panel, press the More button and then select "Current IP addr" using the scroll knob.
After entering the IP Address, the arrow button next to the field will turn red. Click the arrow to confirm the
change. If a unit is found at the specified IP address, this is indicated as well as its name and type. The
unit name can be changed if required.
