SuperVisor LX
SECTION 4
FGAX3249400MANAA
100701
Version 1 Issue 2
4.8
Blk level
This function allows the black level (brightness) of
the display picture to be adjusted.
The Video Pluge test pattern may be used to set
the brightness.
The setting determines the black level of video
material displayed. If it is set too bright, the display
device cannot produce black - giving a washed-out
image If it is set too low the dimmer grays will be
lost with a corresponding loss of detail in black
areas of the picture.
Blk Level
0
Blk Level
The range of control is from -128 to +127 units and
preset is to 0.
Contrast
This function allows the contrast of the display
picture to be adjusted.
The Video Pluge test pattern may be used to set
the contrast.
The contrast is adjusted to determine the white
level of the display. The optimum level depends on
the capabilities of the display device.
Contrast
0
Contrast
The range of control is from -128 to +127 units and
preset is to 0.
Color
This function allows the color level (saturation) of
the display picture to be adjusted.
Color
0
Color
The range of control is from -128 to +127 units and
preset is to 0.
Tint
This function allows the tint (hue) of the display
picture to be adjusted.
Note that Tint is an adjustment for an NTSC
Composite or YC input ONLY.
Tint
Preset
0 Deg
Tint
The range of control is from –30 Degrees to +30
Degrees and preset is to 0.