Version 1 Issue 1
www.snellgroup.com
IQOTR30
Page 19
Setup
The
Setup
screen displays basic information about the unit. Use the functions on
the screen to restart the unit, return all settings to their factory defaults, and to
change the names of the inputs.
On the
Setup
screen, the following information is displayed:
•
Product:
This displays the name of the module.
•
Software Version:
This displays the currently installed software version
number.
•
Serial No:
This displays the unit’s serial number.
•
Build:
This displays the factory build number. This number identifies all
parameters of the unit.
•
KOS:
This displays the operating system version number.
•
PCB:
This displays the PCB revision number.
•
Licensed Options:
This displays the unit’s currently licensed options.
To reboot the unit, simulating a power-up/power-down cycle, click
Restart
.
To reset all of the unit’s settings to their factory defaults, click
Factory Defaults
.
To reset all ot the unit’s settings to their factory defaults, leaving user memories
intact, click
Default Settings
.
Resetting the unit to its factory defaults will also clear all the
saved memory settings
Note:
