Version 1 Issue 1
www.snellgroup.com
IQOTR30
Page 11
Input
The input screen enables the type of input signal to be selected.
Input 1 SDI Rate (SDI IN 1) / Input 2 SDI Rate (RX IN 2)
•
Auto:
When selected, the unit will automatically detect and reclock any valid
input signal, and the detected rate will be displayed in the Unit Status.
If anything else is detected, the output will not be reclocked. If the
On Input
Loss / Mute
option is selected, the output will be muted; or, if the
On Input
Loss / Pass
option is selected, the output will be passed through.
•
SD/DVB-ASI (270 Mb):
When selected, the unit will reclock only SD/DVB-
ASI (270 Mb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive.
If any other standard is applied to the unit, the output will be muted.
•
HD (1.5 Gb):
When selected, the unit will reclock only HD (1.5 Gb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive.
If any other standard is applied to the unit, the output will be muted.
•
3G (3 Gb):
When selected, the unit will reclock only 3G (3 Gb) signals.
When selected, the
On Input Loss
controls are greyed out and are inactive.
If any other standard is applied to the unit, the output will be muted.
