HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.20
Network
This function allows a network name, a logserver
name and a network address to be set up.
For these functions the spinwheels are used to
select the following:
Pos
The position of the cursor is set
using the adjacent spinwheel
Char
The character is selected using the
adjacent spinwheel
Space
A space may be selected using the
adjacent spinwheel
The names may contain up to 20 characters
(including spaces)
Logserver Name
The logserver may be named in the same manner
as NetName.
Network Address
The network address (a 2-digit number) may be set
up using the adjacent spinwheel.
Note that as the unit only reads the Net address on
power-up the unit must be restarted if the address
is changed.
Panel Brightness
The brightness of the panel display may be
adjusted with this function.
Preset is to maximum
Lock
This selection reveals a menu that allows the
Engineering Mode to be entered using a security
code
This display is for internal factory use only.
