HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.16
Timing
The relative timing between the reference signal
and the output signal may be adjusted using these
controls.
Note that these controls may be set up even if the
unit is not genlocked; however, their effect will not
be noticed.
Horizontal Timing
The horizontal or line timing may adjusted over a
range of 0 to 1 HD line in steps of 1 HD pixel.
Vertical Timing
The vertical timing may be adjusted over a range of
0 to 1 HD frame in steps of 1 HD line.
m
MEMORY
This selection reveals the memory save and recall
functions
There are 4 memory locations where all settings
may be saved. To save settings select a memory
location, for example, Save 1. When this is
highlighted the settings will be saved in the Mem 1
location. To recall a memory, select the required
memory location. When this is highlighted the
settings stored in that location will be loaded.
To return to factory set default values press the
Preset button.
m
UTILS
This function allows various actions to be applied to
the output signal.
Pattern
This selection produces a pattern as the output.
PatType
This selection allows the type of pattern to be
chosen.
Patterns available are:
100% Bars
100% Color Bars
75% Bars
75% Color Bars
Ramp
Valid Ramp
Sweep
Sweep
Burst
Multi-Burst
P and Bar
T Pulse and Bar
X Hatch
Crosshatch
Tartan
Tartan Bars
SMPTE Bars
Preset is to 100% Bars
Mono
The picture will become monochrome.
