ARC130S
SECTION 3
Installation
ARC130S 060801 Version 1 Issue 1
3.1
POWER CONNECTIONS
Power Supply
Mains power is supplied to the unit via a filtered
IEC connector with integral fuse holder. The fuse
rating is 2.5 A (T).
The unit automatically senses the supply voltage in
the ranges 90V-132V and 176V-264V and sets
itself up accordingly. No voltage adjustment
procedure is required.
ENVIRONMENT
The unit is ruggedly constructed to meet the
normal environmental requirements. It is important
that there is a free flow of air at both sides of the
unit to dissipate the heat produced during
operation. Installations should be designed to allow
for this.
If the unit is to be rack mounted, first open the front
panel by lifting up the the two levers at right and left
of the panel, hinge the panel down and
AC INPUT
AUTO SELECT
115/230V
1.2/0.6A
45-60Hz
FUSE
T2.5A
pull it forward. The fixing “ears” behind the panel
will be revealed and the unit can be mounted in the
rack. Refit or close the front panel by pushing it
back into position (the levers will click into place).
The rear of the base includes additional fixing
holes on either side to allow a rear support to be
added.
