ARC130S
SECTION 3
Installation
ARC130S 060801 Version 1 Issue 1
3.9
ARC Configuration Loader Operation
The ARC Configuration Loader program can be
run by double clicking on it from Explorer or via the
START menu. When the program is run the User
needs to set two parameters and then up and
downloading may begin.
1. Configuration File Name
This is the name of the file on the PC that the user
wishes to access. If an Upload is undertaken then
the data from the ARC will be stored in this file. If a
Download is undertaken then data from this file will
be sent to the ARC. A valid filename must be
chosen before an Upload or Download can be
undertaken. Note, the file extension must be .TXT.
The filename can be typed in or, the Browse button
may be used to navigate to the desired file.
2. ARC Address
This allows the user to select which ARC on the
RollCall network the program will connect to. The
user must select an ARC before an Upload or
Download can be undertaken. The find module
button should be clicked to navigate to the desired
unit.
3. Download
Clicking this button will send a configuration file
from the PC to the chosen ARC.
4. Upload
Clicking this button will send configuration data
from the ARC to the selected PC file.
Program Menu Selections
The following Menu selections are available to
operators of the ARC Configuration Loader:
1. File: Exit
Ends the ARC Configuration Loader Program.
2. Help: About
Provides Information about the ARC Configuration
Loader including version data
