Snell Advanced Media IQMIX25, Руководство пользователя

Страница: 48 / 55

IQMIX25/26/40/41 RollCall Control Panel
Issue 1 Rev 4 Page 48 © 2017 SAM
The following options are available. Enable check boxes to activate log fields as required.
Where N is the input/output number
Log Field Description
INPUT_ N _IDENT= System-defined identifier for the input, based on the rear
ID.
INPUT_ N _NAME= Name of the input, as defined by the user on the Setup
page. See section 5.19 .
INPUT_ N _STATE= Valid values are:
• OK : input signal good.
• FAIL : input signal not detected.
INPUT_ N _TYPE= HD/SD/3G SDI
INPUT_ N _STANDARD= PAL/NTSC/625 Mono/525 Mono
OUTPUT_ N _IDENT= Name of the output as shown on the rear panel.
OUTPUT_ N _NAME= Name of the output as defined by the user.
OUTPUT_ N _STATE= Valid values are:
• OK - output signal good.
• FAIL - output signal not detected.
• WARN:Freeze
• WARN: Pattern
• WARN:Black
OUTPUT_ N _TYPE= Valid values are:
• SD SDI
• HD SDI
• HD/SD/3G SDI
OUTPUT_ N _STANDARD= Reports the output standard in the format:
<Lines>(<Active>)/<Rate><i/p/sf>
Where:
• Lines = Total lines
• Active = Active lines
• Rate = Frame rate
• I = interlaced
• P = Progressive
• SF = Segmented Frame
For example: 1080/50p or 1125(1080)/25i